show ntp authentication-keys

show ntp authentication-keys

Description

Show information for the NTP authentication key.

The following example shows values for the NTP authentication keys—Key ID, Key Type, and the Secret.

The output of this command includes the following parameters:

Parameter	Description
Key ID	The key identifier used when you configured the NTP authentication key.
Key Type	The key type that you used when you configured the NTP authentication key—md5 or sha1.
Secret	The key value for the MD5/SHA1 hash used when you configured the NTP authentication key.

Related Commands

Command	Description
ntp	Helps configure NTP authentication keys.

Command History

Release	Modification
ArubaOS8.2.1.0	The output was modified to show the SHA1 key type and secret (in encoded format), when SHA1 authentication is configured.
ArubaOS8.0.0.0	Command introduced.

Command Information

Platforms	许可证	Command Mode
All platforms	Base operating system.	Available in Enable and Config modes onMobility Conductorandmanaged devices.