show upgrade-profile

Description

设置集中的image upgrade profile usesArubaOSimages to upgrade themanaged deviceswith theArubaOSimages hosted on an image server. When an upgrade action command is executed on theMobility Conductor, theupgrademgrprocess running onMobility Conductorsends an upgrade request toupgrademgrprocess running on correspondingmanaged devices. Themanaged devicesthen connect to the image server and download the appropriate image file after verifying the validity of the image file, before upgrading to the downloaded image file. The centralized image upgrade feature is enabled and configured onmanaged devicesonly, and supports up to 100 simultaneous image downloads.

Example

(host) (config) #show upgrade-profile

Upgrade Profile

---------------

Parameter Value

--------- -----

Server IP address N/A

Server IPv4/IPv6 address N/A

Username N/A

Password N/A

Protocol tftp

File path .

Download AOS Image from MM Enabled

The output of this command includes the following information:

Parameter	Description
serverip	The IPv4 address of the image server. This parameter is only used bymanaged devicesrunning versions prior toArubaOS8.2 and accepts only IPv4 address. NOTE:For FTP or SCP protocol, specify the username and password.
serveraddr	The IPv4 or IPv6 address of the image server. This parameter is only used bymanaged devicesrunningArubaOS8.2. NOTE:For FTP or SCP protocol, specify the username and password.
Username	If the`protocol`parameter is set toFTPorSCP, this parameter displays the user name thatArubaOSuses to connect to the image server.
Password	If the`protocol`parameter is set toFTPorSCP, this parameter displays the password thatArubaOSwill use to connect to the image server.
Protocol	Specify the protocol used to send the software to themanaged device. TFTP FTP SCP
File path	File path to the location on the image server where the image file(s) reside.
Download AOS Image from MM	If enabled, the flash storage on theMobility Conductoris used as a file server for live upgrade and this locally stored image will be downloaded by themanaged devicesusing HTTP protocol.

Related Commands

Command	Description
upgrade-profile	This command is used to configure the upgrade profile.

Command History

Release	Modification
ArubaOS8.8.0.0	The`Download AOS Image from MM`parameter was added.
ArubaOS8.2.0.0	The`serveraddr`parameter was added.
ArubaOS8.0.0.0	Command introduced.

Command Information

Platforms	License	Command Mode
All platforms	Base operating system.	Available in Enable and Config modes onMobility Conductorandmanaged devices.