show user
ap-group
ap-name
authentication-method dot1x|mac|opensystem|psk|stateful-dot1x|via-vpn|vpn|web
bssid
devtype
essid
internal
ip
location b.f.l
mac
mobile {[bindings][visitors]}
name
phy-type {[a]|[b]}
role
rows
Description
Displays detailed information about user in terms of AP group, authentication method, role and so on. Use theshow usercommand to show detailed user statistics and roles.
Parameter |
Description |
ap-group |
Filter the output of this command by showing users connected to APs that belong to the specified AP group. |
ap-name |
Filter the output of this command by showing users connected to an AP with the specified AP name. |
authentication-method |
Filter the output of this command by the authentication method used for the device: |
dot1x |
Show data for devices using 802.1X authentication. |
mac |
Show data for devices using MAC authentication. |
opensystem |
Show data for devices using open (no) authentication. |
psk |
Show data for devices that do not use authentication but use a pre-shared key for encryption. |
stateful-dot1x |
Show data for devices using stateful 802.1X authentication. |
via-vpn |
Show data for devices that authenticate usingArubaVIA. |
vpn |
Show data for devices using VPN authentication. |
web |
Show data for devices using captive portal authentication. |
bssid |
BSSID显示用户数据为一个特定的设备. |
devtype |
Show output for a specified device type, if identified. If the device name includes spaces, you must enclose it in quotation marks. |
essid |
Show user data for a specific ESSID. If the ESSID includes spaces, you must enclose it in quotation marks. |
internal |
Display internal user entries only. Include theoptions to filter the output of this command by specifying the number of rows from the end of the output and the total number of rows to display/ |
ip |
Show user data for a specific IP address . |
log |
If per-user logging is enabled using theaaa logcommand, include the optional |
mac |
Show user data for a specific MAC address |
log |
If per-user logging is enabled using theaaa logcommand, include the optional |
mobile |
Filter the output of this command to show data for Mobile users. |
bindings |
Show data for users that have moved away from their home network. |
visitors |
Show data for mobility users that are visiting the network. |
name |
User’s name. |
phy-type |
801.11 type |
a |
Matches PHY type a. |
g |
Matches PHY type b or g. |
role |
User role such as employee, visitor and so on. |
rows |
Filter the output of the show user command by specifying the number of rows from the end of the output and the total number of rows to display/ |
Example
(host) #show user
Users
-----
IP MAC Name Role Age(d:h:m) Auth VPN link AP name Roaming Essid/Bssid/Phy Profile Forward mode Type Host Name
---------- ------------ ------ ---- ---------- ---- -------- ------- ------- --------------- ------- ------------ ---- ---------
User Entries: 0/0
Curr/Cum Alloc:0/0 Free:0/0 Dyn:0 AllocErr:0 FreeErr:0
Related Commands
Command |
Description |
This command configures a user role. |
Command History
Release |
Modification |
ArubaOS8.0.0.0 |
Command introduced. |
Command Information
Platforms |
License |
Command Mode |
All platforms |
Base operating system. |
Enable and Config mode onMobility Conductorandmanaged devices. |
