What's New inAirWave8.2.12.1

This section lists the commands introduced, modified, or deprecated inAirWave8.2.12.1.

New Commands inAirWave8.2.12.1

The following commands were introduced inAirWave8.2.12.1:

Command	描述
8-2 Enter Commands > set_vrf_dwg2svg_params	This enter command allows you to set the height and width parameters for VisualRF while creating a floor plan. For example, width=XXXX, height=XXXX -extents. To clear the parameters, press Enter.
8-2 Enter Commands > enable_vrf_notification	This enter command enables the VisualRF feature to send notifications as a rabbitmq message on any change happening in floor plans. You can use the same enter command to disable the feature.

Command

描述

8-2 Enter Commands > set_vrf_dwg2svg_params

This enter command allows you to set the height and width parameters for VisualRF while creating a floor plan.

For example, width=XXXX, height=XXXX -extents.

To clear the parameters, press Enter.

8-2 Enter Commands > enable_vrf_notification

This enter command enables the VisualRF feature to send notifications as a rabbitmq message on any change happening in floor plans.
You can use the same enter command to disable the feature.