show radio config

Indicates if the legacy mode is enabled on theInstant APs to run the radio in the non-802.11n mode.

Displays beacon interval for theInstant APin milliseconds. When beacon interval is configured, the 802.11 beacon management frames are transmitted by the access point at the specified interval.

Displays if theInstant APis allowed advertise its 802.11d (country information) and 802.11h capabilities.

Displays the immunity level configured for anInstant APradio profile to improve performance in high-interference environments. For more information on configuring immunity levels, seerf dot11a-radio-profileandrf dot11g-radio-profile.

Displays the number of channel switching announcements that are sent before switching to a new channel.

Indicates the maximum distance in meters between a client and anInstant APor between a mesh point and a mesh portal.

Indicates if channel reuse type is enabled.

Displays the channel reuse threshold configured for channel reuse type.

Indicates background spectrum monitoring is enabled. When enabled, theInstant APs in access mode continue with normal access service to clients, while performing additional function of monitoring RF interference (from both neighboringInstant APs and non Wi-Fi sources such as, microwaves and cordless phones) on the channel they are currently serving clients.

Displays the status of the Wi-Fi and BLE coexistence status on the 802.11g radio profile.

Indicates the portion of the channel (upper, middle, or lower) that is being monitored on the 5 GHz band.