显示time-range
Description
This command displays a list of the time range profiles configured on theInstant AP.
Example
The following example shows the output of thecommand:
Time Range Summary
------------------
Profile Name Type Start Day Start Time End Day End Time Valid
------------ ---- --------- ---------- ------- -------- -----
test Periodic daily 13:00 - 14:00 No
test1 Absolute 11/17/2015 10:00 11/24/2015 17:00 No
Lunchbreak Periodic weekday 12:00 - 13:00 No
Lunchbreak1 Periodic daily 12:00 - 13:00 No
The output of this command provides the following information:
Parameter |
Description |
Profile Name |
Indicates the name of Time Profiles created on theInstant AP. |
Type |
Indicates the type of time profile created. |
Start Day |
Indicates the date on which the time profile is enabled on the SSID. |
开始时间 |
Indicates the time at which the time profile is made active on the SSID. |
End Day |
Indicates the date on which the time profile is disabled on the SSID. |
End Time |
Indicates the time at which the time profile is disabled on the SSID. |
Valid |
Indicates if the profile is valid for current time. For example, if a profile is run only during a specific time of the day and is not active when the command is run, thecolumn displays the status asNo. |
Related Commands
Command |
Description |
Displays the information of time range profiles used by variousInstant APfunctions. |
|
Creates a time range profile. |
Command History
Release |
Modification |
ArubaInstant8.3.0.0 |
Command introduced. |
Command Information
Platforms |
Command Mode |
All platforms |
Privileged EXEC mode |
