扩充树bpdu-guard超时
Syntax
扩充树bpdu-guard超时描述
Enables and configures the auto re-enable timeout in seconds for all interfaces with BPDU guard enabled. When an interface is disabled after receiving an unauthorized BPDU it will automatically be re-enabled after the timeout expires. The default is for the interface to stay disabled until manually re-enabled.
The没有form of the command disables BPDU guard timeout on the interface. This is the default.
Command context
config
Parameters
-
-
Specifies the re-enable timeout in seconds. Range: 1 to 65535.
非盟thority
Administrators or local user group members with execution rights for this command.
Example
On the 6400 Switch Series, interface identification differs.
Enabling the BPDU guard timeout on interface 1/1/1:
switch(config)#interface 1/1/1switch(config-if)#扩充树bpdu-guard超时10
Disabling BPDU guard timeout on interface 1/1/1:
switch(config)#interface 1/1/1switch(config-if)#没有spanning-tree bpdu-guard