开放的nFlow Configuration
Enable开放的nFlow开放的nFlow is an open communications interface between control plane and the forwarding layers of a network.on流动性的主人. You must enable this in thenode hierarchy.
开放的nFlow开放的nFlow is an open communications interface between control plane and the forwarding layers of a network.controller is not a prerequisite in mastercontrollermode. |
The following procedure describes how to configure开放的nFlow开放的nFlow is an open communications interface between control plane and the forwarding layers of a network.on流动性的主人:
1.In thenode hierarchy, navigate to.
2.In, expand. Select.
3.In, select thecheck box.
4.Click.
5.Click.
6.In thewindow, select the check box and click.
The followingCLICommand-Line Interface. A console interface with a command line shell that allows users to execute text input as commands and convert these commands to appropriate functions.命令配置开放的nFlow开放的nFlow is an open communications interface between control plane and the forwarding layers of a network.on流动性的主人:
(host) [mm] (config) #openflow-controller
(host) ^[mm] (openflow-controller) #openflow-controller-enable
(host) ^[mm] (openflow-controller) #write memory
