OpenFlowin User Role and Virtual AP Configuration

EnableOpenFlowOpenFlowis an open communications interface between control plane and the forwarding layers of a network.in the user-role and the virtual AP profile. You must enable this in the/ mdnode hierarchy.

OpenFlowOpenFlowis an open communications interface between control plane and the forwarding layers of a network.in user role and virtual AP is not a prerequisite in mastercontrollermode.

The following procedure describes how to enableOpenFlowOpenFlowis an open communications interface between control plane and the forwarding layers of a network.in the user-role and virtual AP:

1.In theManaged Networknode hierarchy, navigate toConfiguration > Roles & Policies.

2.In theRolestab, select an existing role.

3.In theRoles > 部分中,点击Show Advanced View.

4.UnderMore, expandNetwork.

5.Select theOpen flowcheck box.

6.点击Submit.

7.Navigate toConfiguration > System > Profiles.

8.InAll Profiles, expandWireless LAN > Virtual AP. Select thedefaultprofile.
This example uses thedefaultprofile.

9.InVirtual AP profile, expandAdvanced.

10.Select theOpenflow Enablecheck box.

11.点击Submit.

12.点击Pending Changes.

13.In thePending Changeswindow, select the check box and clickDeploy changes.

The followingCLICommand-Line Interface. A console interface with a command line shell that allows users to execute text input as commands and convert these commands to appropriate functions.commands enableOpenFlowOpenFlowis an open communications interface between control plane and the forwarding layers of a network.in the user-role and virtual AP:

(host) [md] (config) #user-role

(host) ^[md] (config-submode)#openflow-enable

(host) ^[md] (config-submode)#!

(host) ^[md] (config) #wlan virtual-ap

(host) ^[md] (Virtual AP profile "") #openflow-enable

(host) ^[md] (Virtual AP profile "") #write memory