show ap arm neighbors

show ap arm neighbors {ap-name }|{bssid }|{ip-addr }

Description

Show the ARM settings for an AP’s neighbors.

Parameter

Description

ap-name

Show data for an AP with a specific name.

bssid

Show data for a specific Basic Service Set Identifier (BSSID). An AP’s BSSID is usually the AP’s MAC address.

ip-addr

Show data for an AP with a specific IP address. Enter the IP address in dotted-decimal format.

Examples

The following example shows ARM neighbor information for AP nameap70_1 (For versions prior toArubaOS8.9.0.0).

(主机)(节点)#显示ap手臂邻居ap-name ap70_1

BSSID: BSSID of discovered radio ESSID: ESSID of discovered radio/Src BSSID through which the neighbor is discovered Channel: Channel of operation of discovered radio SNR: Signal to noise ratio of discovered radio tx-power: Tx Power of disovered radio (if known) PL: Path loss to discovered radio (using txpower and SNR) AP Flags: Active: Discovered using OTA updates Passive: Discovered using passive scan Indirect: Two hop neighbors discovered using neighbors OTA update Last Update: Timestamp when last OTA update was received (total OTA updates)

ARM Neighbors ------------- BSSID ESSID Channel SNR Tx-power PL (dB) AP Flags Last Update (Total updates) ----- ----- ------- --- -------- ------- -------- --------------------------- 6c:f3:7f:b6:68:14 ssid-ap1 153 49 22 69 Passive 18:64:72:93:6a:f2 ssid-ap2 132 48 24 68 Passive 18:64:72:02:24:30 ssid-ap3 153 47 18 63 Passive 18:64:72:01:f8:f0 ssid-ap4 36 60 22 0 Indirect 2015-03-12 16:38:26 9c:1c:12:fe:96:e4 ssid-ap5 11 33 18 123 Indirect 2015-03-13 08:37:18 6c:f3:7f:4b:64:23 ssid-ap6 6 51 20 125 Active 2015-03-12 14:05:48

The following example shows ARM neighbor information for Wi-Fi 6E AP namehhm-635 (ForArubaOS8.9.0.0 or later versions).

(Aruba7210-standalone-hhm) ^*[mynode] (config) #show ap arm neighbors ap-name hhm-635 BSSID: BSSID of discovered radio ESSID: ESSID of discovered radio/Src BSSID through which the neighbor is discovered Channel: Channel of operation of discovered radio SNR: Signal to noise ratio of discovered radio tx-power: Tx Power of disovered radio (if known) PL: Path loss to discovered radio (using txpower and SNR) AP Flags: Active: Discovered using OTA updates Passive: Discovered using passive scan Indirect: Two hop neighbors discovered using neighbors OTA update Last Update: Timestamp when last OTA update was received (total OTA updates) ARM Neighbors ------------- bssid essid phy-type channel snr tx-power PL (dB) AP Flags Last Update (Total updates) ----- ----- -------- ------- --- -------- ------- -------- --------------------------- 1c:28:af:68:66:40 11 6GHz 37+ 34 16 72 Passive 1c:28:af:68:66:41 060606 6GHz 37+ 33 16 72 Passive 1c:28:af:68:55:c0 ethersphere-arubaos-6g 6GHz 201E 7 9 92 Active 2021-07-22 14:46:37(21342) 1c:28:af:68:28:c0 jiyong-remote 6GHz 145E 16 20 95 Passive cc:88:c7:41:25:30 ethersphere-arubaos-6g 6GHz 53E 4 9 96 Active 2021-07-22 13:09:47(181) 20:4c:03:80:00:20 aruba-ap 6GHz 37E 17 21 94 Active 2021-07-22 14:46:42(10108) 1c:28:af:68:11:20 liying-635 6GHz 37S 33 21 78 Passive 1c:28:af:68:17:b2 000jiajuntest111 6GHz 37S 4 15 101 Active 2021-07-22 14:14:00(5)

The output of this command includes the following information:

Column

Description

BSSID

BSSID of the discovered radio of the AP.

ESSID

ESSID of the discovered radio of the AP or source BSSID through which the neighbor is discovered.

Channel

Channel of operation of the discovered radio of the AP.

phy-type

(ArubaOS8.9.0.0 or later versions)

Radio band of the AP. Displays one of the following values:

2.4GHz

5GHz

6GHz(For Wi-Fi 6E APs)

SNR

Signal to noise ratio of the discovered radio of the AP.

Tx-power

Transmitter power of the discovered radio of the AP (if known).

PL (db)

路径损耗的发现收音机(using tx-power and SNR)

AP Flags

Active: Discovered using Over-The-Air (OTA) updates

Passive: Discovered using passive scan

Indirect: Two hop neighbors discovered using neighbors OTA update

Last Update

Time stamp when last OTA update was received (total OTA updates)

Related Commands

Command

Description

rf arm-profile

This command enables ClientMatch.

show ap arm client-match neighbors

This command displays the BSSID of other APs seen by clients in the select AP's RF neighborhood.

Command History

Release

Modification

ArubaOS8.9.0.0

The command output was modified to display the following changes: (ArubaOS8.9.0.0 or later versions)

Addedphy-typeparameter.

Added2.4GHz,5GHz, and6GHzvalues forphy-typeparameter.

ArubaOS8.0.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

All platforms

Base operating system.

Enable or Config mode onMobility Conductor.