show ap arm client-match neighbors

ap-name

ip-addr

ip6-addr

Description

If the client match feature is enabled, the output of this command displays the BSSID of other APs seen by clients in the select AP's RF neighborhood.

Parameter	Description
ap-name	View neighboring clients for an AP with a specified name
ip-addr	View neighboring clients for an AP with a specified IP address.
ipv6-addr	View neighboring clients for an AP with a specified IPv6 address.

Example

(主机)[mynode] #显示ap手臂client-matchneighbors ap-name 345-9C

Client View

------------

AP BSSID Channel Clients

-- ----- ------- -------

345-9C c8:b5:ad:ba:f9:d0 157 1

334-12 18:64:72:7e:e1:30 44 0

345-9C c8:b5:ad:ba:f9:c0 6 0

The output of this command includes the following parameters:

Parameter	Description
BSSID	BSSID of the AP.
Channel	Channel of operation of the AP.
Clients	Total number of clients.

Related Commands

Command	Description
rf arm-profile	This command enables ClientMatch.
show ap arm client-match probe-report	This command displays the client probe report for the specified AP.
show ap arm virtual-beacon-report	This command displays the virtual beacon report for an AP with a specific IP or MAC address.
show ap arm client-match unsupported	This command displays a list of clients that failed to be steered to a more optimal AP, and the reason the initial steering request was triggered.
show ap arm client-match summary	This command shows the history of AP association changes triggered by the client match feature.
show ap arm client-match history	This command shows the history of AP association changes triggered by the client match feature.
show ap arm client-match restriction-table	This command displays the list of clients that ClientMatch has restricted from the specified AP.

Command History

Release	Modification
ArubaOS8.0.0.0	Command introduced.

Command Information

Platforms	License	Command Mode
All platforms	Base operating system.	Enable or Config mode onMobility Conductor.