show ap arm client-match unsupported

Description

If the client match feature is enabled, the output of this command displays a list of clients that failed to be steered to a more optimal AP, and the reason the initial steering request was triggered. Thecontrolleralso keeps track of the number of times the client match feature failed to steer a client to a different radio, and the reason that each steer attempt was triggered. If the client match feature attempts to steer a client to a new radio multiple consecutive times for the same reason but client steering fails each time, thecontrollernotifies the AP to mark the client as un-steerable for that specific trigger.

Example

The following example displays a list of unsteerable clients. (For versions prior toArubaOS8.10.0.0.)

(host) [mynode] (config) #show ap arm client-match unsupported

Client Match Unsteerable Clients

---------------------------------

MAC Unsteerable旗帜Last Steer Time Expiry Time Total steers/successful

--- ----------------- --------------- ----------- -----------------------

S: Sticky L: Load Balance H: HE Steer B: Bandsteer I: IOS T: Temporary D(I): dot 11v IOS M: MU steer (R): Rule based Vo: Voice Roam

Total Unsteerable Clients:0

===================================================================================================================

The following example displays a list of unsteerable clients. (ForArubaOS8.10.0.0 or later versions.)

(host) [mynode] (config) #show ap arm client-match unsupported Client Match Unsteerable Clients --------------------------------- MAC Unsteerable Flags Last Steer Time Expiry Time Total steers/successful --- ----------------- --------------- ----------- ----------------------- S: Sticky L: Load Balance H: HE Steer B5G: Bandsteer to 5GHz B6G: Bandsteer to 6GHz I: IOS T: Temporary D(I): dot11v IOS Mr: MU steer (R): Rule based Vo: Voice Roam P: HE-Pooling Total Unsteerable Clients:0

The output of this command includes the following parameters:

Column	Description
MAC	MAC address of the client that could not be steered to a different AP radio.
Unsteerable Flags	The client is marked unsteerable under specific client steer triggers. These triggers include: Sticky:A mobile roaming client is staying associated (sticking) to a sub-optimal AP for too long. Bandsteer:A dual-band capable client is steered towards a 5 GHz radio on a dual-band AP. (For versions prior toArubaOS8.10.0.0.) 5 ghz Bandsteer:A dual-band capable client is steered towards a 5 GHz radio on a dual-band Wi-Fi 6E AP. (ForArubaOS8.10.0.0 or later versions.) Bandsteer to 6GHz:A dual-band capable client is steered towards a 6 GHz radio on a dual-band Wi-Fi 6E AP. (ForArubaOS8.10.0.0 or later versions.) Load Balance:客户端匹配客户转移到一个不同的美联社,based upon the load on APs in the client's RF neighborhood, and the SNR levels the client detected. from each underutilized AP. IOS:An IOS device is temporarily prevented from steering to avoid blacklisting /denylistingthe ESS. Temporary:A client is temporarily prevented from steering after undergoing a successful band steer, then reverting back to a 2.4GHz radio. HE Steer:HE Steer will not be attempted for the client. MU Steer:MU Steer will not be attempted for the client Dot 11v IOS:IOS client has been marked unsteerable for steers. Rule based:Client has been marked unsteerable by Rules Based Client Match (RBCM). Voice Roam:Voice roam steer will not be attempted for the client.
Last Steer Time	Timestamp showing the date and time the client match feature failed to associate the client to a different AP radio.
Expiry Time	The amount of time before a client steer attempt expires.
Total steers/successful	The total number of client steer attempts, and the number of successful client steer attempts.

Related Commands

Command	Description
rf arm-profile	This command enables ClientMatch.
show ap arm client-match probe-report	This command displays the client probe report for the specified AP.
show ap arm client-match neighbors	This command displays the BSSID of other APs seen by clients in the select AP's RF neighborhood.
show ap arm virtual-beacon-report	This command displays the virtual beacon report for an AP with a specific IP or MAC address.
show ap arm client-match summary	This command shows the history of AP association changes triggered by the client match feature.
show ap arm client-match history	This command shows the history of AP association changes triggered by the client match feature.
show ap arm client-match restriction-table	This command displays the list of clients that ClientMatch has restricted from the specified AP.

Command History

Command	Modification
ArubaOS8.10.0.0	The command output was modified to include the following flags for Wi-Fi 6E APs: B5G B6G
ArubaOS8.0.0.0	Command introduced.

Command

Modification

ArubaOS8.10.0.0

The command output was modified to include the following flags for Wi-Fi 6E APs:

B5G

B6G

ArubaOS8.0.0.0

Command introduced.

Command Information

Platforms	License	Command Mode
All platforms	Base operating system.	Enable or Config mode onMobility Conductor.