show ap arm client-match restriction-table

ap-name

ip-addr

ip6-addr

Description

If ClientMatch is enabled, the output of this command displays the list of clients that ClientMatch has restricted from the specified AP. These lists of restricted clients help the client associate to the best AP, by preventing the client from associating with a sub-optional AP radio. The output of this command shows a list of all clients that were ever blacklisted from the specified AP.

Parameter	Description
ap-name	Name of the AP for which you want to view the list of restricted clients
ip-addr	IPv4 address of the AP for which you want to view the list of restricted clients
ip6-addr	IPv6 address of the AP for which you want to view the list of restricted clients

Example

(host)[node] #show ap arm client-match restriction-table ap-name

Client Restriction Table for Wifi0

----------------------------------

Client MAC Time last restricted Restricted(Cur/Last)

---------- -------------------- --------------------

24:77:03:32:88: ec 2014年4月10 03:51:00结婚0

PS deauth Probe(home/scan/bc_ssid) Auth(home/scan)

--------- ------------------------ ---------------

- 2/0/no 4/0

Time since last restriction(sec) Radio Bssid

-------------------------------- -----------

18603 00:1a:1e:89:c0:d0

Client Restriction Table for Wifi1

----------------------------------

Client MAC Time last restricted Restricted(Cur/Last)

---------- -------------------- --------------------

24:77:03:32:7b:cc Wed Apr 10 03:47:16 2014 0

PS deauth Probe(home/scan/bc_ssid) Auth(home/scan)

--------- ------------------------ ---------------

0/0/no 0/0/no 0/0

Time since last restriction(sec) Radio Bssid

-------------------------------- -----------

3866 00:1a:1e:89:c0:c0

The output of this command includes the following parameters:

Column	Description
Client MAC	Displays the MAC address of the client that Client Match is attempting to steer.
Time last restricted	Displays the date and time at which the client was last steered in the vicinity of this radio.
Restricted(Cur/Last)	A "1" in this field indicates that the client is currently in the process of being steered to another radio.
PS deauth	Displays if the client is in power save mode when client match is attempting to steer the client.
Probe(home/scan/bc_ssid)	Displays the number of probe requests received on home channel, AP scanning, and SSID broadcast probe.
Auth(home/scan)	Displays the number of probe requests received on home channel and AP scanning for 802.11 authentication frames.
Time since last restricted	Display the time (in seconds) since the client was last steered in the vicinity of this radio.
Radio Bssid	Displays the unique hard-wireless MAC address of the AP. A unique BSSID applies to each frequency— 802.11a and 802.11g—used from the AP.

Related Commands

Command	Description
rf arm-profile	This command enables ClientMatch.
show ap arm client-match probe-report	This command displays the client probe report for the specified AP.
show ap arm client-match neighbors	This command displays the BSSID of other APs seen by clients in the select AP's RF neighborhood.
show ap arm virtual-beacon-report	This command displays the virtual beacon report for an AP with a specific IP or MAC address.
show ap arm client-match unsupported	This command displays a list of clients that failed to be steered to a more optimal AP, and the reason the initial steering request was triggered.
show ap arm client-match summary	This command shows the history of AP association changes triggered by the client match feature.
show ap arm client-match history	This command shows the history of AP association changes triggered by the client match feature.

Command History

Release	Modification
ArubaOS8.6.0.0	The output will displayClient Restriction Table for Wifi2forAP-555access points.
ArubaOS8.0.0.0	Command introduced.

Command Information

Platforms	License	Command Mode
All platforms	Base operating system.	Enable or Config mode onMobility Conductor.