show ap wired-port-profile [
Description
Shows all AP wired port profiles and their status.
Parameter |
Description |
Default |
|---|---|---|
Name of a wired AP profile. |
default |
Example
The following example shows that thecontrollerhas three wired port profiles. The列列出了一些其他的profiles with references to the wired port profile, and thecolumn indicates whether the profile is predefined. User-defined profiles will not have an entry in the列。
(host) [mynode] #show ap wired-port-profile
AP wired port profile List
--------------------------
Name References Profile Status
---- ---------- --------------
default 3
NoAuthWiredPort 4 Predefined (editable)
shutdown 3 Predefined
Total:3
The following command displays information for an individual wired port profile:
(host) [mynode] #show ap wired-port-profile default
AP wired port profile "default"
-------------------------------
Parameter Value
--------- -----
Wired AP profile default
Ethernet interface link profile default
AP LLDP profile default
Shut down No
Remote-AP Backup Enabled
AAA Profile N/A
Time to wait for authentication to succeed 20 sec
Loop Protect Enable Disabled
Loop Detection Interval 1
Loop Protect Auto Recovery Enable Disabled
Loop Protect Auto Recovery Interval 300
Storm Control Broadcast Disabled
Storm Control Broadcast Threshold 2000
The output of this command includes the following information:
Parameter |
Description |
Wired AP profile |
Name of a wired AP profile to be used by devices connecting the AP’s wired port. The wired AP profile defines the forwarding mode and switchport values used by the port. |
Ethernet interface link profile |
An Ethernet Link profile to be used by devices connecting to the AP’s wired port profile. This profile defines the duplex value and speed to be used by the port. |
AP LLDP Profile |
Name of an LLDP Profile associated with this wired port. |
Shut Down? |
Shows if the wired AP port is enabled (no) or disabled (yes). |
Remote AP Backup |
Use the rap-backup parameter to use the wired port on a Remote AP for local connectivity and troubleshooting when the AP cannot reach thecontroller. If the AP is not connected to thecontroller, no firewall policies will be applied when this option is enabled. (The AAA profile will be applied when the AP is connected tocontroller). |
AAA Profile |
Name of an AAA profile to be used by devices connecting to the wired port of the AP. |
Time to wait for authentication to succeed |
Authentication timeout value, in seconds, for devices connecting the AP’s wired port. The supported range is 1–65535 seconds, and the default value is 20 seconds. |
Loop Protect Enable |
Shows if loop protection is enabled or disabled. |
Loop Detection Interval |
Shows time in seconds after which a loop detection packet is transmitted on the AP port. |
Loop Protect Auto Recovery Enable |
Show if automatic recovery of the port in the AP that is shut down because of loop protection is enabled or disabled. |
Loop Protect Auto Recovery Interval |
Shows time in seconds after which automatic recovery of the port in the AP that is shut down because of loop protection is attempted. |
Storm Control Broadcast |
Shows if broadcast storm control is enabled or disabled. |
Storm Control Broadcast Threshold |
Shows broadcast packets per second on each Ethernet port of an AP before the Ethernet port is shut down. |
Related Commands
Command |
Description |
This command configures a wired port profile. |
Command History
Release |
Modification |
ArubaOS8.3.0.0 |
Following parameters were introduced:
|
ArubaOS8.0.0.0 |
Command introduced. |
Command Information
Platforms |
License |
Command Mode |
All platforms. |
Base operating system. |
Enable or Config mode on themanaged deviceorcontrollerwhere the AP terminates. |
