显示lc-cluster
exclude-vlan
group-membership
group-profile
gsm counters
heartbeat counters
load distribution
papi counters
upgrade
scheduled-upgrades
v-probe
Description
Displays information related to vlan, membership, profile, heartbeat, and so on for a cluster. The optional output modifiers | begin , | exclude, and | include help you display those lines that begin, include, exclude, respectively, the line expression given in the CLI command. The | redirect-output modifier helps you redirect the command output.
Parameter |
Description |
exclude-vlan |
Displays a list containing vlans excluded from L2 Probing |
group-membership |
Displays the active cluster member of cluster profile |
group-profile |
Displays the cluster profile |
gsm counters |
Displays the counters pertaining to various GSM events |
heartbeat counters |
Displays the peer disconnection events statistics. |
load distribution |
Displays the current load distribution |
ap |
Displays the current load distribution on the AP |
client |
Displays the current load distribution on the client |
papi |
Displays the cluster messaging related counters. |
vlan-probe |
Displays the Cluster VLAN Probe information. |
Displays the name of the cluster profile. |
|
ap {details} |
Displays the details of the APs in the cluster. |
controller {details|ip|ipv6} |
Displays thecontrollersdetails in the cluster. Use one of the following parameters:
|
upgrade |
Displays the upgrade details of controllers and APs in the cluster. Use one of the following parameters:
|
rap-public-ip |
Displays the public IP address of the Remote AP cluster configured behind NAT. |
scheduled-upgrades |
Displays the status of all the clusters scheduled for an upgrade. |
Example
An example output of the显示lc-clustergroup-membershipcommand.
Cluster Enabled, Profile Name = "test4nodecluster"
Redundancy Mode On
Active Client Rebalance Threshold:20%
Standby Client Rebalance Threshold:40%
Unbalance Threshold:5%
Active AP Load Balancing:YES
Active AP Rebalance Threshold:20%
Active AP Unbalanced Threshold:5%
Active AP Rebalance Count:50
Active AP Rebalance Timer:1 mins
Starting VRRP ID:99
VRRP Passphrase:********
Cluster Info Table
------------------
Type IPv4 Address Priority Connection-Type STATUS
---- --------------- -------- --------------- ------
peer 10.17.65.34 128 L2-Connected CONNECTED (Leader, last HBT_RSP 11
自我10.17.65.35 128 N /连接(成员)同行10.17.65.36 128 N/A INCOMPATIBLE (BUILD_STRING_MISMATCH)
peer 10.17.65.37 128 N/A INCOMPATIBLE (BUILD_STRING_MISMATCH)
peer 10.17.65.38 128 N/A INCOMPATIBLE (BUILD_STRING_MISMATCH)
An example output of the显示lc-clusterexclude-vlancommand.
#show lc-cluster exclude-vlan
---------------------------
VLANs excluded from probing
---------------------------
1
An example output of the显示lc-clustergroup-profilecommand.
#show lc-cluster group-profile cluster_test
IPv4 Cluster Members
--------------------
CONTROLLER-IP PRIORITY MCAST-VLAN VRRP-IP VRRP-VLAN VRRP-VLAN GROUP-ID RAP-PUBLIC-IP
------------- -------- ---------- ------- --------- --------- --------- ---------
10.17.65.34 128 0 0.0.0.0 0 200 0 10.10.10.11
10.17.65.35 128 0 0.0.0.0 0 200 0 10.10.10.12
Redundancy:Yes
Active Client Rebalance Threshold:20%
Standby Client Rebalance Threshold:45%
Unbalance Threshold:5%
An example output of the显示lc-clustergsmcommand.
#show lc-cluster gsm counters
Cluster GSM Channel Counters
----------------------------
STA Channel: Adds >> 0
STA Channel: Deletes >> 0
STA Channel: Activates >> 0
STA Channel: Deactive and Dormant Deletes >> 0
Cluster STA Channel: Dormant Adds >> 0
Cluster STA Channel: Dormant Deletes >> 0
Cluster STA Channel: Dormant Section Update >> 0
Cluster STA Channel: Section Update >> 0
Cluster STA Channel: STA not found during Dormant Section Update >> 0
Cluster STA Channel: STA not found during Section Update >> 0
AP Channel: Adds >> 0
AP Channel: Deletes >> 0
Cluster AP Channel: Dormant Adds >> 0
Cluster AP Channel: Deactivates >> 0
Cluster AP Channel: Dormant Deletes >> 0
BSS Channel: Adds >> 0
BSS Channel: Deletes >> 0
BSS Channel: Section Update >> 0
BSS Channel: BSS not found during Section Update >> 0
Cluster BSS Channel: Dormant Adds >> 0
Cluster BSS Channel: Deactivates >> 0
Cluster BSS Channel: Dormant Deletes >> 0
An example output of the显示lc-clusterheartbeatcommand.
#显示lc-cluster心跳计数器s
Cluster Heartbeat Counters
--------------------------
IPv4 Address RES RSR MIS HMPD LMRPD IDPD CPDPD CDPD LMHINT LTOD
--------------- -------- -------- ----- ----- ----- ----- ----- ---- ------ ------------------------
10.17.65.34 28147 28147 0 61 0 0 0 0 376 Thu Jun 16 23:53:48 2016
10.17.65.36 0 0 0 0 0 0 0 0 0
10.17.65.37 0 0 0 0 0 0 0 0 0
10.17.65.38 0 0 0 0 0 0 0 0 0
-----------PREAMBLE-----------------
RES - REQ SENT
RSR - RSP RCVD
MIS - MISSES
HMPD - HBT MISS PEER DEAD
LMRPD - LINK MAP RCVD PEER DEAD
IDPD - IPSEC DOWN PEER DEAD
An example output of the显示lc-clusterpapicommand.
#show lc-cluster papi counters
Cluster PAPI Counters
---------------------
RX STM UP >> 1
RX STM DOWN >> 1
RX AUTH UP >> 0
RX AUTH DOWN >> 0
RX ISAKMPD UP >> 0
RX ISAKMPD DOWN >> 0
RX DDS UP >> 0
RX DDS DOWN >> 0
TX SOS CLUSTER ENABLE SUCCESS >> 2
TX SOS CLUSTER ENABLE FAIL >> 0
TX SOS CLUSTER DISABLE SUCCESS >> 1
TX SOS CLUSTER DISABLE FAIL >> 0
TX SOS CLUSTER PEER ADD SUCCESS >> 127
TX SOS CLUSTER PEER ADD FAIL >> 0
TX SOS CLUSTER PEER DEL SUCCESS >> 0
TX SOS CLUSTER PEER DEL FAIL >> 0
An example output of the显示lc-clusterloadcommand.
#show lc-cluster load distribution ap
Cluster Load Distribution for APs
---------------------------------
Type IPv4 Address Active APs Standby APs
---- --------------- -------------- ---------------
self 10.15.146.3 3 3
peer 10.15.146.4 1 3
peer 10.15.146.5 1 0
peer 10.15.146.6 1 0
Total: Active APs 6 Standby APs 6
#show lc-cluster load distribution client
Cluster Load Distribution for Clients
-------------------------------------
Type IPv4 Address Active Clients Standby Clients
---- --------------- -------------- ---------------
self 10.15.146.3 0 0
peer 10.15.146.4 0 1
peer 10.15.146.5 0 0
peer 10.15.146.6 1 0
Total: Active Clients 1 Standby Clients 1
An example output of the显示lc-clustervlan-probecommand.
#show lc-cluster vlan-probe status
Cluster VLAN Probe Status
-------------------------
Type IPv4 Address REQ-SENT REQ-FAIL ACK-SENT ACK-FAIL REQ-RCVD ACK-RCVD VLAN_FAIL CONN-TYPE START/STOP
---- --------------- -------- -------- -------- -------- -------- -------- --------- --------- ----------
peer 10.17.65.34 248 0 372 0 372 248 0 L2 Conn 5/ 5
peer 10.17.65.36 0 0 0 0 0 0 0 N/A 0/ 49
peer 10.17.65.37 0 0 0 0 0 0 0 N/A 0/ 49
peer 10.17.65.38 0 0 0 0 0 0 0 N/A 0/ 49
An example output of the显示lc-clusterscheduled-upgradescommand.
显示lc-clusterscheduled-upgrades
Cluster Scheduled Upgrade Status
--------------------------------
Profile To Version Partition ID AP Preload size Scheduled Time MD Timezone
------- ---------- ------------ --------------- -------------------------
v4 8.4.0.0-mm-dev_65200 Default 100 Fri Jun 8 15:00:00 2018 Asia/Tokyo
Related Commands
Command |
Description |
This command is used to configure the cluster group profile in theMobility Conductor. |
|
This command configures the group-membership in each node. This command is used to enable the cluster membership on the managed devices. |
|
This show command displays heartbeat threshold values, datapath assignments, number of peers and peer data statistics. |
|
This command displays information related to cluster heartbeat counters. |
|
This command displays the history of the connection and disconnection events with a reason and the time stamp. |
Command History
Release |
Modification |
ArubaOS8.7.0.0 |
The functionality of |
ArubaOS8.5.0.0 |
The load balance thresholds were updated in the output and theStarting VRRP IDandVRRP Passphrasefields are added in the output. |
ArubaOS8.4.0.0 |
The parameter |
ArubaOS8.2.0.0 |
The parameter details of |
ArubaOS8.0.0.0 |
Command introduced. |
Command Information
Platforms |
License |
Command Mode |
All platforms |
Base operating system. |
Config mode or enable mode in themanaged device. |
