show wms rogue-ap list

show wms rogue-ap list

Description

This command displays the information on the rogue APs in the network. When an AM classifies an interfering AP as a Rogue AP it sends that classification to the WMS process.

Use this command to list all known Rogue APs that may be potential security threats.

Examples

Theshow wms rogue-ap listcommand displays a list of rogue APs detected in the network.

(host)[mynode] #show wms rogue-ap list

AP List

-------

BSSID ESSID Class PHY Type AP-name Encryp IBSS Last Mon Eth MAC

----- ----- ----- -------- ------- ------ ---- ----------------

ac:a3:1e:53:72:94 arturo04 rogue 80211A wpa2-psk-aes no ac:a3:1e:cd:35:5a

84:d4:7e:64:1c:72 hpeguest rogue 80211A open no ac:a3:1e:cd:35:5a

00:62:ec:26:2e:2f smtcwireless rogue 80211A wpa-8021x-tkip no c8:b5:ad:c3:ac:fc

Total: 3

The output of this command includes the following information:

Column

Description

BSSID

Basic Service Set Identifier (BSSID) for the AP. This is usually the AP’s MAC address.

ESSID

The Extended Service Set Identifier (SSID) that identifies a wireless network.

Class

AP classification: will always be set to ‘rogue’.

A rogue AP that is unauthorized and is plugged into the wired side of the network. You can configure automatic shutdown of rogue APs in the IDS unauthorized device detection profile.

PHY Type

Shows one of the following 802.11 types:

  • 802.11a
  • 802.11b
  • 802..11g
  • 802.11 ag

AP-name

Name of the rogue AP.

Encryp

Encryption type used on each listed rogue AP.

IBSS

Shows if ad hoc BSS is enabled or disabled on each listed rogue AP.

Last Mon Eth MAC

Shows the last monitored MAC address seen on the wired network for this rogue AP.

Related Commands

Command

Description

wms ap

This command allows you to classify an AP into one of several categories.

wms client

此命令允许您对导线进行分类less client into one of several categories.

Command History

Release

Modification

ArubaOS8.2.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

All platforms

Base operating system.

Enable or Config mode on thecontrollerormanaged device.