What's New inAruba Instant8.8.0.0

这个命令配置超时duration for the 802.1X authentication.

This command disables the automatic download and installation of DRT updates on theInstant APmanaged byAruba Central.

This command configures DDNS profiles in theInstant AP. A maximum of three DDNS profiles can be created.

This command configures the domain name for theInstant AP.

This command assigns a DNS profile for theInstant AP.

This command configures the operation mode for Eth1 port.

This command configures the sniffer function on the radio.

This command displays the operational status of AP antennas.

This command displays the sniffer information configuration on theInstant AP.

This command displays the DDNS profile configurations in theInstant AP.

The following parameters were introduced:

• input-filter-enable
• input-filter-disable

Thesftpparameter was added to allow users to transfer files over a secure network.

All WebUI and SSH requests received in the uplink port is now rejected by the AP automatically.

New parameters to specify the DDNS service provider, connection mode, username, and password were introduced.

A new parameter,tunnel-trusted, that changes the role of incoming tunnel traffic to permit-all was introduced.

A new parameter,dhcp-client, to configure the IP address assignment of the AP was introduced.

The following parameters were introduced:

• authentication-mode
• client-secret
• bleDataForwarding
• perFrameFiltering

The following endpoint type was introduced:

• Azure-IoTHub

The following deviceClassFilters were introduced:

• google
• minew
• onity
• polestar
• blyott
• gwahygiene

A new parameter,ddns-profile, to configure the DDNS profile was introduced.

Theiot-coexistence-disableparameter was added to disable the BLE and Wi-Fi coexistence feature on the 802.11g radio profile.

The output of this command now includes theIoT Coexistenceparameter, which displays the status of the Wi-Fi and BLE coexistence on the 802.11g radio.

The output of this command now includes theIoT Coexistenceparameter, which displays the status of the Wi-Fi and BLE coexistence on the 802.11g radio.

A new parameter,single-ap, to deploy the AP as a single AP was introduced.

A new parameter,uplink wired-vlan, to configure the priority of uplink VLANs was introduced.

The range forbandwidth-limit, throttle-upstream, throttle-downstreamparameters were increased from 1-65536 to 1-2000000.

The following parameters were added:

• Thedelete-pmkcacheparameter was added. Enabling this parameter deletes the client entry in the PMK cache maintained for fast roaming immediately upon client disconnection.
• Theftm-responder-enableparameter was added. Enabling this parameter allows the AP to send responses to time measurement queries from FTM capable clients.