What's New inAruba Instant8.9.0.0

This command is used to configure the BLE MAC address.

This command is used to include pointer records in the DNS server updates sent by the DDNS clients.

This command configures a secondary internal server to authenticate management users when the response from the RADIUS or TACACS server times out.

This command allows RADSEC to use an EST certificate on all its servers.

This command configures a 6 GHz radio profile.

Theestparameter was added to allow configuring of EST certificates for AP1X authentication.

• Two new options,prefer-higher-bandandforce-6ghz, were added to theband steering-modeparameter.
• The following options were added towide-bandsparameter:
  • 6ghz
  • 24ghz,5ghz
  • 24ghz,6ghz
  • 5ghz,6ghz

A new option,auto, was added toreg-classparameter.

Theap1x-common-caandap1x-common-certparameters were introduced.

The following parameters were added:

• ap-chan-rpt-6ghz.
• disable-nb-resp_wide-band-ie.

The following parameters were added:

• usbSerialDeviceTypeFilter
• companyIdentifierFilter
• serviceUUIDFilter
• macOuiFilter
• localNameFilter

Thedynamic-dns-ptrparameter was added to enable Distributed, L3 profile clients to send PTR records to the DDNS server.

Two new parameters,dhcp-relayanddhcp-server, to configure DHCP relay for networks with IP addresses assigned by the VirtualControllerwere added.

该命令的功能是我修改nclude configuration of 6 GHz radio. Use this command to configure the channel and transmit power of the 6 GHz radio in Wi-Fi 6E access points.

该命令的功能是我修改nclude configuration of 6 GHz radio. Use this command to disable the 6 GHz radio in Wi-Fi 6E access points.

The denotation of radio bands in the output of the these commands were changed from802.11aand802.11b/gto5 GHzand2.4 GHzrespectively.

A new entry calledCrash Infois added in the output of the show aps command, to capture the crash information of conductor and member APs.

• TheDDNS Client List for PTR recordssection is added in the output of theshow ddns clientscommand.
• TheDDNS PTR Enabledparameter is added in the output of theshow ddnscommand.

A new parameter calledDHCP PTR DDNSis introduced in the output for Distributed, L3 DHCP profiles.

TheTime Range VPN Profileinformation was added to the output.

A new parameter,absolute-time, to configure a schedule for vpn preemption was added.

A new parameter,preemption absolute-time, to configure a schedule for vpn preemption was added.

该命令的功能是我修改nclude configuration of 6 GHz radio. Use this command to configure the Wi-Fi mode of the 6 GHz radio in Wi-Fi 6E access points.

Theestandap1xsub-parameters were added as part of thepki-cert-assign applicationparameter.

• A new option,wpa3-sae-aes, was added to the cypher-suite parameter for Wi-Fi 6E capable access points.
• A new option,802.116GHz, was added to the uplink band parameter for Wi-Fi 6E capable access points.

The default value ofssl-protocolparameter was changed totslv1.2in factory default APs runningAruba Instant8.9.0.0 and later versions. APs upgrading toAruba Instant8.9.0.0 or later versions from earlier versions will continue to use the existing ssl-protocol configuration.