AP组

AP组{default | }

Am-Filter-Profile {默认|}

airslice-profile

airslice-visibility record-limit

ap-multizone-profile {默认|}

ap-system-profile {default | }

authorization-profile {default | }

clone {default | }

dot11-60GHz-radio-profile {default | }

dot11a-radio-profile {default | }

dot11a-traffic-mgmt-profile {default | }

dot11g-radio-profile {default | }

dot11g-traffic-mgmt-profile {default | }

ENET-USB-PORT-PROFILE{default | noAuthWiredPort | shutdown | }

enet0-port-profile {默认|}

enet1-port-profile {默认|}

enet2-port-profile {default | }

enet3-port-profile {默认|}

enet4-port-profile {default | }

事件 - 阈值profile {默认|}

ids-profile {default | }

mesh-accesslist-profile {default | }

网格集群profile {默认|} [优先级<1-16>]

网格拉迪奥 - profile {默认|}

不...

供应配置文件{默认|}

regulatory-domain-profile {default | }

rf-optimization-profile {default | }

USB Profile{default | }

virtual-ap {default | }

wifi-uplink-profile {priority}

Description

此命令配置AP组。AP组位于配置层次结构的顶部。AP组收集虚拟AP定义和配置配置文件，这些定义和配置配置文件应用于组中的AP。

Parameter	Description
ap-group	Profile name that identifies the AP group. The name must be 1–63 characters long. 笔记：You cannot use quotes (“) in the AP group name.
Am-Filter-Profile	Configures the AM filter profile.
airslice-profile	Configures the Air Slice profile.
airslice-visibility record-limit	Defines the maximum number of records stored for clients.
ap-multizone-profile	Configures the AP MultiZone profile.
ap-system-profile	配置AP管理操作，例如记录级别。看ap system-profile on page 1.
authorization-profile	Restrictive group for unauthorized AP.
clone	现有的AP组的名称复制了配置文件名称。
dot11-60GHz-radio-profile	Configures 802.11 60 GHz radio profile. Seerf dot11-60GHz-radio-profile on page 1.
dot11a-radio-profile	Configures 802.11a radio settings and load balancing for the AP group; contains the ARM profile. Seerf dot11a-radio-profile on page 1.
dot11a-fraffic-mgmt-profile	Configures bandwidth allocation. Seewlan traffic-management-profile on page 1.
dot11g-radio-profile	Configures 802.11g radio settings and load balancing for the AP group; contains the ARM profile. Seerf dot11a-radio-profile on page 1.
dot11g交通-MGMT-Profile	Configures bandwidth allocation. Seewlan traffic-management-profile on page 1.
ENET-USB-PORT-PROFILE default NoAuthWiredPort 关闭	允许连接某些使用USB连接作为以太网端口的设备。此参数将USB端口配置为功能为有线端口（下行链接），该端口由AP有线端口配置文件控制。 Default:关闭笔记：This parameter is not applicable when a USB modem that is connected to an IAP or远程APfunctions as an uplink.
enet0-port-profile	Configures the duplex and speed of the Ethernet interface 0 on the AP. For information on how these profiles are defined, seeap wired-port-profile on page 1.
enet1-port-profile	Configures the duplex and speed of the Ethernet interface 1 on the AP. For information on how these profiles are defined, seeap wired-port-profile on page 1.
enet2-port-profile	在AP上配置以太网接口2的双工和速度。这些配置文件是使用命令定义的ap wired-port-profile on page 1.
enet3-port-profile	Configures the duplex and speed of an Ethernet interface 3 on the AP. These profiles are defined using the commandap wired-port-profile on page 1.
enet4-port-profile	在AP上配置以太网4接口的双工和速度。有关这些配置文件的定义方式的信息，请参见ap wired-port-profile on page 1.
event-thresholds-profile	配置接收的信号强度指示（RSSI）指标。看rf event-thresholds-profile on page 1.
ids-profile	ConfiguresAruba’s IDS. Seeids profile on page 1.
mesh-accesslist-profile	Configures the mesh access list profile.
mesh-cluster-profile	Configures the mesh cluster profile for mesh nodes that are members of the AP group. There is a “default” mesh cluster profile; however, it is not applied until you provision the mesh node. Seeap mesh-cluster-profile on page 1.
优先<1-16>	Configures the priority of the mesh cluster profile. If more than two mesh cluster profiles are configured, mesh points use this number to identify primary and backup profile(s). The lower the number, the higher the priority. 范围：1–16 Default:1
mesh-radio-profile	为AP组成员配置802.11G和802.11a无线电设置。看AP Mesh-HT-SSID题材在第1页. 命令s to configure mesh for outdoor APs require the Outdoor Mesh license.
不	Negates any configured parameter.
配置资料	Configures the provisioning profile.
regulatory-domain-profile	Configures the country code and valid channels. Seeap regulatory-domain-profile on page 1.
rf-optimization-profile	配置覆盖孔和干扰检测。看第1页的RF优化题材.
virtual-ap	一个或多个配置文件,每个配置ures a specified WLAN. Seewlan virtual-ap on page 1.
wifi-uplink-profile	Configures a specified Wi-Fi uplink. Seeap wifi-uplink-profile on page 1.
USB-Profile	USB profile applied to the AP group.
virtual-ap	一个或多个配置文件,每个配置ures a specified WLAN. Seewlan virtual-ap on page 1.

Example

The following command configures a virtual AP profile to the “default” AP group:

(host)[mynode](config) #ap-group test1

(host)[mynode] (AP group "test1") #virtual-ap corpnet

The following command configures a Wi-Fi uplink profile to the “default” AP group:

(host)[mynode](config)# ap-group wfu-test

Warning: WiFi uplink profile will not take effect until an AP is reprovisioned

(host)[mynode](AP group "wfu-test")# wifi-uplink-profile test-uplink priority 1

Related Commands

命令	Description
显示AP组	显示AP组的配置。

命令历史记录

发布	Modification
ArubaOS8.7.0.0	引入了以下参数： `airslice-profile` `airslice-visibility record-limit` `mesh-accesslist-profile` `USB Profile`
ArubaOS8.5.0.0	添加了以下参数： `wifi-uplink-profile` `ENET-USB-PORT-PROFILE`
ArubaOS8.4.0.0	The`dot11-60GHz-radio-profile`parameter was added.
ArubaOS8.0.0.0	介绍了命令。

命令Information

Platforms	License	命令Mode
All platforms	基本操作系统，除了注释参数。	Config mode on移动导体.