ap-name

airslice-profile

am-filter-profile {default | }

ap-multizone-profile {default | }

ap-system-profile {default | }

authorization-profile {default | }

clone {default | }

dot11a-radio-profile {default | }

dot11a-traffic-mgmt-profile {default | }

dot11g-radio-profile {default | }

dot11g-traffic-mgmt-profile {default | }

enet0-profile {default | }

enet1-profile {default | }

enet2-profile {default | }

enet3-profile{默认| <配置文件名称>}

enet4-profile {default | }

event-thresholds-profile {default | }

exclude-mesh-cluster-profile-ap {default | }

exclude-virtual-ap {default | }

ids-profile {default | }

mesh-accesslist-profile {default | }

mesh-cluster-profile {default | } priority

mesh-radio-profile {default | }

regulatory-domain-profile {default | }

rf-optimization-profile {default | }

virtual-ap {default | }

Description

This command configures a specific AP. Profiles that are applied to an AP group can be overridden on a per-AP name basis, and virtual APs can be added or excluded on a per-AP name basis. If a particular profile is overridden for an AP, all parameters from the overriding profile are used. There is no merging of individual parameters between the AP and the AP group to which the AP belongs.

Parameter	Description
ap-name	Configures an AP name. Give a name that identifies the AP. By default, the name of an AP can either be its Ethernet MAC address, or if the AP has been previously provisioned with an earlier version of一个rubaOS, a name in the format ... The name must be 1–63 characters long. NOTE:You cannot use quotes (“) in the AP name.
airslice-profile	Configures an Air Slice profile.
am-filter-profile	Configures AM filter profile.
am-multizone-profile	Configures AP MultiZone profile.
ap-system-profile	Configures AP administrative operations, such as logging levels. Seeap system-profile on page 1.
authorization-profile	Restrictive group for unauthorized AP.
clone	Name of an existing AP name from which profile names are copied.
dot11a-radio-profile	Configures 802.11a radio settings for the AP group; contains the ARM profile. Seerf dot11a-radio-profile on page 1.
dot11a-traffic-mgmt-profile	Configures bandwidth allocation. Seewlan traffic-management-profile on page 1.
dot11g-radio-profile	Configures 802.11g radio settings for the AP group; contains the ARM profile. Seerf dot11g-radio-profile on page 1.
dot11g-traffic-mgmt-profile	Configures bandwidth allocation. Seewlan traffic-management-profile on page 1.
enet0-profile	Configures the duplex and speed of the Ethernet 0 interface on the AP. Seeap enet-link-profile on page 1.
enet1-profile	Configures the duplex and speed of the Ethernet 1 interface on the AP. Seeap enet-link-profile on page 1.
enet2-profile	Configures the duplex and speed of the Ethernet 2 interface on the AP. Seeap enet-link-profile on page 1.
enet3-profile	Configures the duplex and speed of the Ethernet 3 interface on the AP. Seeap enet-link-profile on page 1.
enet4-profile	Configures the duplex and speed of the Ethernet 4 interface on the AP. Seeap enet-link-profile on page 1.
event-thresholds-profile	Configures Received Signal Strength Indication (RSSI) metrics. Seerf event-thresholds-profile on page 1.
exclude-mesh-cluster-profile-ap	Excludes the specified mesh cluster profile from this AP. The Secure Enterprise Mesh license must be installed.
exclude-virtual-ap	Excludes the specified virtual AP profiles from this AP.
ids-profile	Configures一个ruba’s IDS. Seeids profile on page 1.
mesh-accesslist-profile	Configures the mesh access list profile.
mesh-cluster-profile	Configures the mesh cluster profile for the AP (mesh node). There is a “default” mesh cluster profile; however, it is not applied until you provision the mesh node. Seeap mesh-cluster-profile on page 1. The Secure Enterprise Mesh license must be installed.
priority	Configures the priority of the mesh cluster profile. If more than two mesh cluster profiles are configured, mesh points use this number to identify primary and backup profile(s). The supported range of values is 1–16. The lower the number, the higher the priority. Default:1
mesh-radio-profile	Configures the 802.11g and 802.11a radio settings for the AP (mesh node). Seeap mesh-ht-ssid-profile on page 1. The Secure Enterprise Mesh license must be installed.
no	Negates any configured parameter.
regulatory-domain-profile	Configures the country code and valid channels. Seeap regulatory-domain-profile on page 1.
rf-optimization-profile	Configures load balancing and coverage hole and interference detection. Seerf optimization-profile on page 1.
virtual-ap	一个或多个配置文件,每个配置ures a specified WLAN. Seewlan virtual-ap on page 1.

Example

The following command excludes a virtual AP profile from a specific AP:

(host) [mynode] (config) #ap-name 00:0b:86:c0:cf:d8

(host) [mynode] (AP name "00:0b:86:c0:cf:d") #exclude-virtual-ap corpnet

Related Command

Command	Description
show ap-name	To view the AP settings.

Command History:

释放	Modification
一个rubaOS8.7.0.0	The following parameters were introduced: `airslice-profile` `mesh-accesslist-profile`
一个rubaOS8.0.0.0	Command introduced.

释放

Modification

一个rubaOS8.7.0.0

The following parameters were introduced:

airslice-profile
mesh-accesslist-profile

一个rubaOS8.0.0.0

Command introduced.

Command Information

Platforms	License	Command Mode
一个ll platforms	Base operating system.	Config mode onMobility Conductor.