What's New inArubaOS8.3.0.0

This section lists the commands introduced, modified, or deprecated inArubaOS8.3.0.0.

New Commands inArubaOS8.3.0.0

The following commands were introduced inArubaOS8.3.0.0:

Command	Description
iot transportProfile	This command configures an IoT transport profile.
iot usetransportProfile	This command sets an IoT management server profile.
show iot transportProfile	This command displays information about the IoT profile status.
show airmatch debug apinfo	This command displays information about the AirMatch debug data of an AP.
show airmatch debug db-dump status	This command displays information about the status of the AirMatch debug database dump.
show airmatch debug pathloss history rep-radio	This command displays information about the recent AirMatch debug path loss.
show airmatch network-tech-support	This command collects the output for all the radios that are in the same partition for a specified radio AP name.
show airmatch tech-support	Displays the AirMatch technical support information of an AP.
show airmatch debug advanced stat	This command displays detailed information about the AirMatch debug status of an AP.
show ble_relay disp-attr	This command shows the BLE relay attributes.
show ble_relay iot-profile	This command shows the BLE relay IoT profile details.
show ble_relay tag-report	This command shows the BLE relay tag data.
show ble_relay ws-log	This command shows the BLE relay WebSocket logs.

Modified Commands inArubaOS8.3.0.0

The following commands were modified inArubaOS8.3.0.0:

Command	Description
aaa authentication via connection-profile	The following changes are introduced: A new parameter,tos-dscp, is introduced to support IPsec packets with higher QoS-DSCP. The description of thewhitelistparameter is updated to display the maximum limit of allowable entries.
aaa profile	The following new parameters are introduced: radius-acct-session-id-in-access reauth-wired-user-vlan-change
ap system-profile	The following new parameters are introduced: dual-5ghz-mode recovery-mode
ap wired-port-profile	The following new parameters are introduced: auto-recovery-enable auto-recovery-interval loop-detection-interval loop-protect-enable
configuration device	TheA7280option is added under thedevice-modelparameter.
provision-ap	The following parameters are introduced: radio-0-5ghz-ant-gain radio-0-5ghz-ant-pol radio-1-5ghz-ant-gain radio-1-5ghz-ant-pol
show ap active	The new flags,T,U,V, andW介绍了。在一个ddition, the output parameters for this command are modified to show the radio ID (that is, Radio 0 and Radio 1), radio band, and the debug details such as APs' operation modes for the dual 5GHz mode settings.
show ap arm client-match history	A new output value,ASis introduced for theSignaloutput column.
show ap arm client-match summary	A new parameter,brief, is introduced to display brief statistical information of the output parameters.
show ap details	The output of the command is modified to include AP Fast Recovery statistics.
show airmatch debug feasibility	The following parameters are introduced in the output of this command: Current Opmode HW Supported Opmodes Configured Opmodes Feasible Opmodes Config BW range(MHz) Hardware BW range(MHz) Eirp Range Chan 20MHz Eirp Range Chan 40MHz Eirp Range Chan 80MHz Eirp Range Chan 160MHz Config EIRP range(dBm) Hardware EIRP range(dBm) EIRP Offset(dB) Band Band Range
show ap debug radio-stats	The output of this command includes MCS bucket mapping information with channel width, number of spatial streams, and guard interval information of 802.11ac APs.
show ap debug bss-stats
show ap debug client-stats
show ap wired-port-profile	The following parameters are introduced in the output of this command: Loop Protect Enable Loop Detection Interval Loop Protect Auto Recovery Enable Loop Protect Auto Recovery Interval
show datapath	Thecurrent standby entriescounter is added to thestationparameter.
ssh	Thedisable-ciphersanddisable-macparameters have been introduced in this command to configure ciphers and MAC algorithms, respectively.
show ssh	Thessh disable-ciphersandssh disable-macparameters are introduced to the output of this show command.

Send Feedback

Back to Top