Link Search Menu Expand Document

Inter-segment DNAT Exceptions

Configuration > Networking > Routing > Inter-segment DNAT Exceptions

Use this tab to configure inter-segment routing and DNAT rules when traffic is crossing between segments. Click the edit icon and theInter-Segment Routing & DNATwindow opens. Click+Addand select any rule in the table to modify or define the following:

Field Description
Appliance Name Name of the appliance that the DNAT exception is being applied to.
Source Segment Name of the segment traffic is initiating from.
Matches Destination IP IP address that matches the destination segment IP address, before DNAT. The IP address is included in the defined policy match criteria.
Send to Segment Name of the segment the packets are translated to from the matched destination IP address. This is included in the set criteria.
Translated Destination IP address of the DNAT IP address when the segment is translated.

NOTE:If DNAT is not needed, this field is empty.
Enabled Whether inter-segment DNAT is enabled or disabled within your segment.
Comment Any additional information.

NOTE:This tab only pushes the inter-segment DNAT exceptions to one appliance, selected in the left toolbar.

Back to top

© Copyright 2022 Hewlett Packard Enterprise Development LP. The information contained herein is subject to change without notice. The only warranties for Hewlett Packard Enterprise products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. Hewlett Packard Enterprise shall not be liable for technical or editorial errors or omissions contained herein. Aruba Networks and the Aruba logo are registered trademarks of Aruba Networks, Inc. Third-party trademarks mentioned are the property of their respective owners. To view the end-user software agreement, go toAruba EULA.

Baidu