OSPF模板

Use the OSPF template to apply OSPF configurations per segment to all appliances in the SD-WAN fabric.

1. 单击要修改配置的段旁边的编辑图标。

2. 根据需要配置以下元素：

   场地	描述
   启用OSPF	indicates whether the segment can access OSPF protocol. If you select不要申请, Orchestrator ignores this field when applying this template to appliances.
   路由图名称重新分配到OSPF	Name of the route map being redistributed to the SD-WAN. The OSPF template is used in conjunction with the Route Redistribution Maps template. OSPF route maps are configured in the Route Redistribution Maps template, and then applied in the OSPF template. The default OSPF route map name is “default_rtmap_to_ospf”. 笔记：将此字段留空以保留设备上的当前设置。
   Admin Status	指示接口管理状态是向上还是向下。如果您选择不要申请, Orchestrator ignores this field when applying this template to appliances.
   您好间隔	Length of time (in seconds) that must transpire between hello packets that a router sends on an OSPF interface.
   Dead Interval	必须在尚未检测到路由器的Hello包的邻居面前转移的时间长度（以秒为单位）可以声明OSPF路由器。
   Transmit Delay	Length of time (in seconds) that must transpire before transmitting a link state update packet. Specify a value from 1 to 65535.
   Retransmit Interval	未收到确认的路由器必须等待，必须等待传输。
   Authentication Type	Type of authentication to use for requests. Select one of the following drop-down list options: 不要申请– Orchestrator ignores this field when applying this template to appliances. 没有任何– Authentication not performed. 文本- 简单的密码身份验证，允许每个区域配置一个键（密码）。 MD5- 消息摘要密码身份验证。每个路由器上配置了一个键ID和密钥（密码）。路由器使用基于OSPF数据包，密钥ID的算法以及生成附加到数据包的消息摘要的键。
   身份验证密钥	Key (password) to use for authentication of requests. This field is available only if Authentication Type is set to Text.
   MD5密钥	用于MD5认证请求的密钥ID。仅当身份验证类型设置为MD5时，此字段才可用。
   MD5密码 / MD5确认密码	MD5密钥的密码。这些字段仅在将身份验证类型设置为MD5时才可用。指定并确认密码。

3. Click更新.

---